Rotary Cutters
-
- TNN newbie
- Posts: 38
- Joined: Wed Apr 20, 2011 1:36 pm
Rotary Cutters
I am looking at getting one of these as my layers seems to come out all different by cutting with scissors. ARe they worth having, easy to use, and what size should I get? Thanks
-
- TNN convert
- Posts: 51
- Joined: Wed Mar 17, 2010 8:41 am
Re: Rotary Cutters
I have a fiskars one and it works really well, but It's tricky going around the corners & tight curves on the patterns. I don't usually cut through too many layers for that reason, or else they don't line up in the end.
- rangitotogirl
- TNN oracle
- Posts: 13777
- Joined: Tue May 15, 2007 1:28 pm
- Location: Whangaparaoa
- Contact:
Re: Rotary Cutters
Absolutely worth it, if you do a lot of sewing. I'd never willingly use scissors for cutting out again. I have a 45 mm blade and find it works well. Don't get a Birch one from Spotlight, they're rubbish when it comes to cutting multiple layers, and cutting pins makes them go blunt really quick.
I have an Olfa one and it is good.
I have an Olfa one and it is good.

http://www.carrymybaby.co.nz
http://www.facebook.com/carrymybabynewzealand
http://www.scarecrowfarm.co.nz
http://www.facebook.com/scarecrowfarm
http://www.mobywrap.co.nz
- littlejo
- TNN nerd
- Posts: 2292
- Joined: Wed Jun 13, 2007 4:23 pm
- Location: Lower Hutt
- Contact:
Re: Rotary Cutters
I have a 45mm olfa too and love it. I inherited from dh's nana but i think it would be a worthwhile investment. i find it much faster than scissors.
- sable
- Spinning Goddess
- Posts: 14160
- Joined: Sun Jan 23, 2005 8:44 pm
- Location: Christchurch
- Contact:
Re: Rotary Cutters
45mm is a good all rounder. I like both my Olfa and my Clover; not so keen on the Fiskars.
Rachelle
http://raciebaby.blogspot.com/
http://raciebaby.blogspot.com/
- ob1
- TNN nutter
- Posts: 686
- Joined: Fri Jul 06, 2007 12:08 pm
- Location: Hamilton
Re: Rotary Cutters
Once you have one you'll use it for everything, I wouldn't dream of using scissors to cut out a top or anything anymore, and cutting long straight lengths is so easy using a perspex block, I have a 80cm long one, which I find really handy. Cheap brand replacement blades seem to work fine in all the cutters too, so it can be worth getting a nice cutter, and then just buying cheap replacement blades. Well, I guess it depends how much sewing you do too. 

Tara
Mum to Olly, Emma, and Anna
www.summerwarmth.co.nz
Breastfeeding products and information for women with Raynaud's
www.woven.co.nz
Beautiful baby carriers
Mum to Olly, Emma, and Anna
www.summerwarmth.co.nz
Breastfeeding products and information for women with Raynaud's
www.woven.co.nz
Beautiful baby carriers
- anotherhopeful
- TNN nerd
- Posts: 2473
- Joined: Sun Nov 15, 2009 7:52 pm
- Contact:
Re: Rotary Cutters
I so need one! I cut out so many things! Where do you find the good ones and what is a good price? I'll be cutting alot of drill and cotton but also knits
Mum to Zak (April 09), Lockie (Jan 11) and Sadie (May 14)
- ob1
- TNN nutter
- Posts: 686
- Joined: Fri Jul 06, 2007 12:08 pm
- Location: Hamilton
Re: Rotary Cutters
I just got mine from Spotlight, I think I paid $45 for the cutter and cheap birch blades are probably $5 each, I probably go through about 4 blades a year? The self healing cutting mats that you get from Spotlight are really expensive though, its much better to get them from Warehouse Stationary, they aren't self healing, but they are fine, I do a fair bit of sewing, and mine is a couple of years old and fine. And its worth getting a decent size cutting board, I got an A3, then an A2, and now have an A1 ($40)
wish I'd just gotten the A1 to start with of course.
http://www.warehousestationery.co.nz/is ... 56@WSL-B2C

http://www.warehousestationery.co.nz/is ... 56@WSL-B2C
Tara
Mum to Olly, Emma, and Anna
www.summerwarmth.co.nz
Breastfeeding products and information for women with Raynaud's
www.woven.co.nz
Beautiful baby carriers
Mum to Olly, Emma, and Anna
www.summerwarmth.co.nz
Breastfeeding products and information for women with Raynaud's
www.woven.co.nz
Beautiful baby carriers
- rangitotogirl
- TNN oracle
- Posts: 13777
- Joined: Tue May 15, 2007 1:28 pm
- Location: Whangaparaoa
- Contact:
Re: Rotary Cutters
I found the birch blades didn't work nearly as well as the Olfa blades. Greenbeans are cheaper than Spotlight for the Olfa cutters and blades.
http://www.greenbeans.co.nz/notions-acc ... 0-099.html
They had a co-op on here a while back.
http://www.greenbeans.co.nz/notions-acc ... 0-099.html
They had a co-op on here a while back.

http://www.carrymybaby.co.nz
http://www.facebook.com/carrymybabynewzealand
http://www.scarecrowfarm.co.nz
http://www.facebook.com/scarecrowfarm
http://www.mobywrap.co.nz
- anotherhopeful
- TNN nerd
- Posts: 2473
- Joined: Sun Nov 15, 2009 7:52 pm
- Contact:
Re: Rotary Cutters
Ok I need to get some GB supplies so I will get some then. I will need a large cutting board as I'm cutting out fabric up to size 8 childrens. (bigger if i get around to sewing for me!) ... I'm getting excited, I hate cutting!
Mum to Zak (April 09), Lockie (Jan 11) and Sadie (May 14)
- Tentacles
- TNN guru
- Posts: 8543
- Joined: Tue Dec 05, 2006 3:30 pm
- Location: Lower Hutt
- Contact:
Re: Rotary Cutters
Ok so I have no idea what I am doing wrong but I so don't feel the love for my rotary cutter. I bought it about 3 years ago along with a nice big cutting mat and I have used the rotary cutter maybe half a dozen times. I find I don't have so much control for fiddly shaped bits and find it much quicker and easier to use my sewing scissors. What am I missing here people? Admittedly I'm never trying to cut out several layers of fabric as once I prefer to cut PUL out then fleece out separately but I never felt the love when using it for my other non nappy sewing either. In fact I've thought about selling mine a few times when I see it gathering dust in the drawer.
Alison - Currently SAHM to DS (04/07) and DD (09/10).
http://kiwicraftychemist.blogspot.com
http://kiwicraftychemist.blogspot.com
- Neak1
- TNN guru
- Posts: 7346
- Joined: Thu Mar 16, 2006 10:01 pm
-
- TNN oracle
- Posts: 17750
- Joined: Mon Nov 15, 2004 8:56 pm
- Location: Ōtautahi
Re: Rotary Cutters
What size cutter are you using Tentacles? I have a 28 mm which I use for clothing as it copes well with the curves. I use the 45 mm for quilting/straight shapes.
If you are using a mat from Warehouse Stationery, don't be tempted to iron fabric while on it, it will buckle the mat
I have a blade sharpener (in both sizes) which I use often and find it works well enough for a few more sharpens for me.
I have a deluxe Olfa cutters. I like the handle grip. Just be warned that you can't attach a cutting guide to the ergo deluxe olfa cutters (I discovered this after I bought a guide in a co-op, after using Claire's cutter with a guide attached - perfect for adding a seam allowance to Ottobre patterns as you cut.)
If you are using a mat from Warehouse Stationery, don't be tempted to iron fabric while on it, it will buckle the mat

I have a blade sharpener (in both sizes) which I use often and find it works well enough for a few more sharpens for me.
I have a deluxe Olfa cutters. I like the handle grip. Just be warned that you can't attach a cutting guide to the ergo deluxe olfa cutters (I discovered this after I bought a guide in a co-op, after using Claire's cutter with a guide attached - perfect for adding a seam allowance to Ottobre patterns as you cut.)
Leanne
Mum to 3 beautiful children
Small and Large pocket patterns available, for a small donation to Unicef. DIY kits also available for $5 each with free pattern. PM or email me for more info...
Mum to 3 beautiful children

- Tentacles
- TNN guru
- Posts: 8543
- Joined: Tue Dec 05, 2006 3:30 pm
- Location: Lower Hutt
- Contact:
Re: Rotary Cutters
Do you measure riht across to work outthe size? If so its probably 45mm I'm guessing. Maybe I should gt a smaller one to try. I found it really difficult for ant short straight sections or tightish curves so just gave up 

Alison - Currently SAHM to DS (04/07) and DD (09/10).
http://kiwicraftychemist.blogspot.com
http://kiwicraftychemist.blogspot.com
Who is online
Users browsing this forum: No registered users and 2 guests